Fortress FX-16 10 lb Aluminum Anchor for 33-38 ft Boats [FX-16]

Fortress FX-16 10 lb Aluminum Anchor [FX-16]

The Fortress FX-16 is a precision-machined aluminum-magnesium fluke anchor designed to provide high holding performance at a relatively low weight. This exact product is manufacturer part number FX-16 and weighs 10 lb (4.5 kg).

Fortress's current selection guide places the FX-16 in the 33-38 ft (10-12 m) boat range under its stated sizing assumptions, including average vessel proportions and windage, approximately 30 knots of wind, average bottom conditions, and moderate protection from open seas. For storm conditions, Fortress recommends moving one or two anchor sizes larger. Boat length alone should not be treated as a universal sizing rule.

Key Features

• 10 lb (4.5 kg) Fortress aluminum-magnesium anchor
• Precision-machined, corrosion-resistant construction
• Adjustable fluke angle
• 32° setting for most common bottoms
• 45° setting for extremely soft, soupy mud or silt
• Can be disassembled for compact storage
• Tough anodized finish
• Made in the USA

FX-16 Specifications

• Manufacturer: Fortress Marine Anchors
• Model: FX-16
• Manufacturer Part Number: FX-16
• UPC: 647124120162
• Anchor Weight: 10 lb (4.5 kg)
• Shank Length: 31 in (787 mm)
• Fluke Length: 18 in (457 mm)
• Stock Length: 25 in (635 mm)
• Manufacturer Working Load: 1,250 lb (567 kg)

Manufacturer Sizing Guidance

Fortress lists the FX-16 for boats approximately 33-38 ft (10-12 m) under the assumptions stated in its selection guide. Actual anchor selection also depends on vessel windage and proportions, weather exposure, bottom type, anchoring conditions, rode, scope, and intended use. For storm conditions, Fortress recommends selecting an anchor one or two sizes larger.

Recommended Rode Components

Fortress's selection guide specifies the following support-hardware sizes for the FX-16:

• Proof-coil chain: 5/16 in (8 mm)
• Nylon rope: 1/2 in (13 mm)
• Shackle: 5/16 in (8 mm)

Required rode length and the final anchoring-system configuration depend on water depth, expected conditions, vessel requirements, and the manufacturer's anchoring guidance.

Fluke Angle Guidance

Use the 32° setting for most common sea bottoms. Fortress reserves the 45° setting for extremely soft, soupy mud or silt. Using the 45° setting in unsuitable bottom conditions can prevent the anchor from setting correctly.

What's Included

This listing is for the standalone Fortress FX-16 anchor, not a Fortress Complete Anchoring System bundle. Fortress states that Mud Palms are included with Fortress anchors.

Rope, chain, shackles, storage bags, and other anchoring-system components should not be assumed included unless specifically identified with the exact offer.

Warranty

Fortress provides a Lifetime Parts Replacement Warranty to the original purchaser for qualifying Fortress anchor parts, subject to the manufacturer's current warranty terms and exclusions. Mud Palms are excluded from the parts-replacement warranty, and shipping and handling charges apply to approved replacement parts.

Installation & Safety

An anchor is safety equipment. Follow Fortress's current Safe Anchoring Guide for anchor sizing, rode selection, scope, setting, retrieval, and operating conditions. Verify the complete anchoring system for the vessel and intended use before relying on it.