Bow Thrusters

HRC1004LMultipurpose watertight hand held remote controlIntegrated LED lampThe main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, facilitating operation in the dark. This is the only hand-held remote in the...

TDC1042 Thruster Joystick ControllerThe Quick TCD series remote control systems have been designed to control the stern and bow thrusters manufactured by Quick®. The TCD 1042 control panel is for operating the BTQ bow thruster through a joystick...

Bow Thruster Extension Cable - 20'Connection cable 20' for use with Vetus thruster control panels. Quick Guide (pdf)

Bow Thruster Extension Cable - 53'Connection cable 53' for use with Vetus thruster control panels. Quick Guide (pdf)

Bow Thruster Panel w/Buttons & Time LapseSingle touch panel for operating a Vetus bow or stern thruster. Supplied with quick connectors for BP29 series wiring harnesses. Capable of daisy chaining additional controls for multiple stations.Features:...

Bow Thruster Panel w/Joystick & Time LapseSingle joystick panel for operating a Vetus bow or stern thruster. Supplied with quick connectors for BP29 series wiring harnesses. Capable of daisy chaining additional controls for multiple stations.Features:...

Bow Thruster Remote Control f/1 Bow Thruster - 12/24VThis radio control may be used for remote operation of Vetus bow or stern thrusters. Also suitable to operate other electrically driven equipment on board. Supplied with neck lanyard.Additional...

Drive Pin Set for BOW 50/60/75/80/95Replacement Stainless Drive pin for the VETUS BOW 50/60/75/80/95 (5x27.5mm) propeller shaft.

Drive Pin Set for Vetus Bow 35 & 55kgf - 5-PackReplacement Drive Pin (5 pieces) for the Vetus Bow 35 and 55kgf Thrusters (5X45,5Mm).

Fuse Strip C20 - 160 AmpFeatures:Fuse Strip C20160 Amp

Fuse Strip C20 - 200 AmpFeatures:Fuse Strip C20200 Amp

Fuse Strip C20 - 300 AmpFeatures:Fuse Strip C20300 Amp

Fuse Strip C20 - 500 AmpFeatures:Fuse Strip C20500 Amp

Fuse Strip C30 - 125 AmpFeatures:Fuse Strip C30125 Amp

Fuse Strip C30 - 50 AmpFeatures:Fuse Strip C3050 Amp

FuseholderSpecifically for VETUS fuses

Gasket Tailpiece - 2mmFeatures:Gasket Tailpiece2mmSpecifically for Bow 35, 55, 60, 75, 80 & 95

Mounting Cap Propeller Type BP1342Replacement Mounting Cap half for the VETUS 178mm Bow Thruster PropellersOrder two units for a full cap set

Neutral Button Kit for SICO & SISCOFeatures:Neutral Button KitSpecifically for VETUS SICO and SISCO

O-Ring D 48 x 3mm NBR 70 ShoreO-Ring for Vetus mufflers, waterlocks and gas/water separators.Specifications:Dimensions: 48mm x 3mmFits: NLP40, NLPH40, NLPG40, WLOCK40R, LSS40A and LGS4038 NLP45, NLPH45, NLPG45, WLOCK45R, LSS45A and LGS4538 NLP50,...

Rotating Hose Connection for LP, LSS & NLP - 40mmReplacement rotating Inlet hose port for VETUS LP40, LSS40 and NLP40 Waterlock Mufflers. Supplied complete with O Rings.

Rotating Hose Connection for LP, LSS & NLP - 45mmReplacement rotating Inlet hose port for VETUS LP40, LSS40 and NLP40 Waterlock Mufflers. Supplied complete with O Rings.

Rotating Inlet Set for NLP & LSG - 75mmReplacement rotating hose port, including Clamp Ring assembly and Seal for the Vetus NLP75, LSG75, LGS75, NLP375 and NLPH75.

Set of Shear-Pins for Bow Thruster 80kgf - 5-PackReplacement inboard sheer pin (Safety pin) set (5 pieces) for the Vetus BOW80.Material: BrassDimensions: 4 x 39.5mm

Set: Strainer FTR1320This set contains the 2 halves of the strainer for the FTR1320 waterstrainer.

Shear-Pin Set for Vetus BOW5512/24A - 5-PackReplacement Shear-pin Set (5 pieces) for Vetus BOW5512/24A series with solid tunnel flange and two hex bolt motor attachment.Dimensions25.6mm x 4mm

V-Ring V30-A RubberFeatures:V30-ARubberV-Ring

V-RingV-Ring for BOW125D