Sailing Hardware

"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while...

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while...

Backing Plate for 704-02-62Schaefer Stainless Steel Backing Plate for 704-02-62.

Opening Luff Rope PrefeederFeatures:Single handed operation by pushing on the springEasy to install with a lashing or fixed to the forestayCan be installed below any headsail foil or headsail reefing configurationStainless steel forged...

FRX20 Friction Ring - 20mm (25/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX15 Friction Ring - 15mm (19/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX10 Friction Ring - 10mm (25/64")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX6 Friction Ring - 7mm (9/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired position.When not...

Stanchion CleatDesigned to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube.Technical Specifications:Material - NylonDimensions (Cleat length) - 4.37" (111 mm)Weight - 3.17 oz (90...

Shroud CleatBarton Marine's Shroud Plain Cleat is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features:Clamps onto shroud wire without causing damageSimple and...

Shroud Cleat with EyeBarton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features:Wide eye opening for stowage of...