Sailing Gear

29mm Carbo T2 BlockThe high-strength composite T2™ is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for...

12mm Bolt-Down Fairlead - SingleHarken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces...

Quick Release Pin - 5/16" x 1" GripQuick Release Pin, 5/16" x 1.0" Grip. 316 Stainless Steel. Safe Working Load 3000 lbs.

Clamp-On Drink Holder - Single - TeakAdd an elegant touch to your boat with Edson's Teak Base Stainless Drink Holder, with the ability to clamp-on to 1", 1-1/8" and 1-1/4" pipes. With the right amount of space for any drink that can fit inside of a...

Bow Shackle - 1/4" Pin - 13/16"L x 3/4"WFeatures:High strength to weight ratioGrade 316 Stainless Steel bodies and pinsCoined shackle pin head

3/8" Pin Chainplate BentSpecifications:Pin Hole: 3/8" (10 mm)Max. Wire: 3/16" (5 mm)Fastener Holes: (4) 3/8" (10 mm)Length: 10" (254 mm)Width: 1-1/4" (31 mm)Thickness: 1/8" (3 mm)Weight: 6.6 oz. (187 g)

Deck Eye Hole Center - 24mmThis deck eye is made from 316 stainless steel. It underwent multiple machining and finishing operations to ensure that they were free of damaging sharp corners and burrs.Specifications:Height: 5mmWidth Between Centers of...

Hatch LockUsed to secure the sliding hatch to the washboards, this hatch lock can be operated from the cabin or the cockpit. Provision for a padlock.Features:Suitable for washboards up to 19mm thickThe Only RORC-certified hatch...

Anti-Rattle Hasp & StapleThis hinge was fabricated from marine-grade 316 stainless steel and electro-polished for a long-lasting high finish.Features:The pins of the hasps and staples are welded in place for added...

Tiller Lock Gun - GreyThis tiller lock maintains the rugged reliability of the original and brings the design fully up to date.Design suitable for any tiller-steered yacht or sports boatA simple mechanism allows the tiller to be set and adjusted, which...

Bottom Transom PintleThe 4-hole transom mounted pintle is one of the most common and used transom fittings around. The fitting has 4 5mm countersunk fixing holes for attaching to the back of the boat. The pin is made from 316 stainless steel and is made...

25mm Treble Block with Center BecketThe 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly...