Sailing Hardware

Large Bailer - Outside MountFlange Size: - 80 x 142mm (3-3/16 x 5-9/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...

Mini Bailer - Outside MountFlange Size: - 56 x 92mm (2-1/4 x 3-5/8")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...

Super Max Bailer - Inside MountFlange Size: - 78 x 135mm (3-1/8 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...

Super Medium Bailer - Inside MountFlange Size: - 67 x 135mm (2-11/16 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are...

Super Mini Bailer - Indside MountFlange Size: - 61 x 106mm (2-7/16 x 4-3/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made...

Nylon Sliding Cleats - 165mm (6.5")A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.When not in use,...

Aluminum Sliding Cleats - 175mm (6.89")A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.When not in...

High Load Eye - 12mmManufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to...

Triple Rope Clutch Max Rope Diameter:Up 12mm(0.47")Fastening: 6mm x 6 (0.24" x 6)SWL:550kg (1,212.54lbs)The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine...

Drain Bung - 15mm(.60") Bore - WhiteThis screw-type drain bung only is still among the best available.Supplied with rubber ‘O’ ring for a watertight seal.

Drain Bung - 15mm (19/32')Bore - BlackThis screw-type black drain bung is still among the best available.Supplied with rubber `O' ring for a watertight seal. Specifications:Length: 15mm (19/32")weight: 7gm(.23oz)

Drain Bung & Socket - 15mm(.60") Bore - BlackThis screw-type drain bung and socket is still among the best available.Supplied with rubber ‘O’ ring for a watertight seal.

Drain Bung & Socket - 15mm(.60") Bore - WhiteThis screw-type drain bung and socket is still among the best available.Supplied with rubber ‘O’ ring for a watertight seal.

'K' Cam Cleats - MidiManufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are very strong, lightweight and have excellent...

'K' Cam Cleats - MiniManufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are very strong, lightweight and have excellent...

Shroud Cleat w/Eye - NylonFeatures a wide eye opening for stowage of halyard shackles

Shroud Cleats - NylonPlain cleat for flag halyards etc.

Spinnaker Pole SlideSpinnaker pole slides have a heavy-duty stainless steel ring welded to an ttattachment plate which is through-bolted to the slide. Generous ring opening to accept most pole ends.Specifications:Length:80mm (3.15")Width:42mm (1...

Stanchion Cleat - NylonDesigned to fit stanchions or pushpit/pullpit tubes - fits in seconds and features soft nylon jaws that willnot damage the tube.

Towable Genoa End & Becket - Fits 32mm(1-1/4") T-TrackLength:109mmWidth:47mmHeight:58mmSheave Diameter:45mmMax Rope Diameter:10mmBreak Load:N/ASafe Working Load:N/AWeight:236gA popular range of genoa cars and sliders designed to run on 32mm (1-1/4")...

Transom Pintle - 9.5mm DiameterManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Pintle Diameter: 9.5mmFastenings Diameter: 5mmWeight: 70g

Transon GudgeonManufactured from stainless steel with tough nylon surrounds. Specifications:Fastenings: 5mm (0.20")Weight: 30gr (1.5oz)

Anchor Chain Claw-Hook TensionerThe "Claw Hook" design features a shorter overall length. The claw design will grab 1/4", 5/16" and 3/8" chain. The toggled claw enables you to grab the chain quickly and easily. Two 1/4" mounting holes are provided in...

Cable Cradles - 2 CradlesThe all-stainless fitting will organize your shore power cables and hose. Easily installed on stanchions 7/8" and 1" (will accommodate large sizes with longer clamp) diameter. Available with either 2 or 3 cradles. The 2 cradle...

Diamond Pad EyeThis pad eye can be used on deck for life lines or other applications and has a safe working load of 750 pounds.Specifications:1/4 in. BailLength: 2-5/8 in.Width: 1-1/2 in.

Grab 'N Go Hook Mount Only with Clamp OnlyReplacement Mount Only

Grab 'N Go Mooring HookThis innovative quick connect/ disconnect system allows you to easily pick up and release your mooring with your boat hook. Simply attach the side hook to the end of your boat hook with the supplied clamp and the Grab n' Go is...

Hinged Pad Eye- 1/4"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free...

Hinged Pad Eye- 3/8"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free...

Hinged Pad Eye- 5/16"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free...

Rigging Tape - Black - 1" x 15'C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins or any sharp objects that may harm sails, lines, or...

Rigging Tape - White - 1" x 15'C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins or any sharp objects that may harm sails, lines, or...

Tubular Turnbuckle Adjustment Tool - 3/16" & 1/4" BodiesFeatures an easy to grasp handle

Shroud CleatFeatures:All stainless steel construction, compatible with you stainless steel riggingWill not corrodeEasily attached to 5/32" thru 3/8" diameter wire or rodIdeal for flag, radar reflector and steaming shape halyards with an eye for...

Tubular Turnbuckle Adjustment Tool - 5/16", 3/8" & Smooth Line BodiesFeatures an easy to grasp handle

Flat/Large Sail Track StopsFlat/Large: 0.75 x 1 x 0.125" (19 x 25 x 3mm)When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with...

Flat/Small Sail Track StopsFlat/Small: 0.42 x 1 x 0.125" (11 x 25 x 3mm)When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with...

Round Sail Track StopsRound 0.50" dia. x 0.875" (13 x 22mm)When it's time to lower your sail you can rely on Davis' Round Sail Track Stop to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made...

Tiller-TamerMaintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and feel to the tiller handle. Does not interfere with...

Adjustable Trapeze RingFeatures:19mm(3/4") ball bearing pully accepts up to 6mm(1/4") diameter wireGrade 316 stainless steel loop and ball bearingsAcetal SheaveNylon Cheeks